5-Axis CNC Machining for Silverstone Motorsport Engineering
5-axis CNC machining for Silverstone enquiries from our workshop in Chatteris, Cambridgeshire. One-off parts, prototypes and small batches, typically 1 to 100 parts.
27 years' machining experience · NDA signed as standard
Serving Silverstone
CNC Machining for Silverstone, Northamptonshire
Silverstone is within Northamptonshire, one of the four counties served by Advanced Precision Technologies. Our workshop is in Chatteris, not a separate branch in Silverstone.
Based at Unit 1, South Fens Enterprise Park, Fenton Way, Chatteris PE16 6WA, APT serves Cambridgeshire, Northamptonshire, Oxfordshire and Leicestershire. Industries served include aerospace, defence, motorsport and medical, with a strong R&D and prototype focus.
APT uses DMG MORI CMX 70 U and Matsuura MX-520 5-axis milling machines, with OPEN MIND hyperMILL and Autodesk Fusion for CAM programming. Machining tolerances are 5 to 10 microns (0.005–0.010 mm).
Two in-house machinists run the machines, supported by a trusted network of CNC programmers and inspectors built up over 20+ years. Work is seasonal, with consultants and contractors brought in during busy periods.
STEP, IGES and technical drawings are accepted. An NDA is signed with every customer as standard. If no drawing exists, send a physical part for scanning, modelling from the scan and production of full drawings.
Chatteris workshop
Unit 1, South Fens Enterprise Park, Fenton Way, Chatteris PE16 6WA.
Small batches
One-offs and prototypes are welcome; typical batches are 1 to 100 parts.
Machining tolerances
5 to 10 microns (0.005–0.010 mm). Discuss your part and requirements with APT.
NDA as standard
An NDA is signed with every customer.
Services in Silverstone
What We Make for Silverstone Engineers
5-Axis CNC Machining
Specialist 5-axis milling on DMG MORI and Matsuura machines, holding 5 to 10 micron tolerances.
Learn more
Manufacturing
One-off parts, prototypes and small batches, typically 1 to 100 parts, with a strong R&D and prototype focus.
Learn more
CAM Programming
Toolpath programming in OPEN MIND hyperMILL and Autodesk Fusion.
Learn more
Reverse Engineering
Send a physical part: APT scans it, models it from the scan and produces full drawings.
Learn more
Design for Manufacture (DFM)
Design reviews so parts can be machined accurately and cost-effectively.
Learn more
CMM Inspection
5-axis scanning CMM inspection, with reports on request, including a standalone service for parts made elsewhere.
Learn more
Prototype Machining
One-off and prototype machining for R&D, with typical batches of 1 to 100 parts.
Learn more
3D Scanning & Technical Drawings
Physical parts are scanned, modelled from the scan and turned into full technical drawings.
Learn more
24/7 CNC Machining
Overnight and weekend machining is available when deadlines demand it.
Learn moreWhy APT
APT Capabilities for Silverstone Enquiries
Confirmed machining, inspection and team capabilities. Contact APT to discuss your particular job.
Small-batch focus
One-offs, prototypes and typical batches of 1 to 100 parts.
Machining experience
Founded and wholly owned by Thomas White, a precision engineer with 27 years of machining experience.
Confidentiality as standard
An NDA is signed with every customer.
Certified systems
ISO 9001, ISO 14001 and Cyber Essentials certified.
Flexible capacity
Consultants and contractors support busy periods; overnight and weekend machining is available when needed.
Inspection on request
5-axis scanning CMM inspection reports on request, including for parts made elsewhere.
Common challenges
Preparing a Machining Enquiry from Silverstone
A clear brief helps identify the machining and inspection requirements.
Part size and geometry
Maximum machining part size is 675 mm × 600 mm × 550 mm (X × Y × Z), with cylindrical parts up to 600 mm diameter. Typical batches are 1 to 100 parts; one-offs and prototypes are welcome. Contact APT about the suitability of your particular part.
Material and grade
Materials machined include aluminium, stainless steel, titanium, plastics and exotic alloys. APT has also machined glass and carbon. Please specify the material and grade in your enquiry so suitability can be discussed.
Missing drawings
STEP, IGES and technical drawings are accepted. An NDA is signed with every customer as standard. If no drawing exists, send a physical part for scanning, modelling from the scan and production of full drawings.
Inspection requirements
APT holds ISO 9001 quality management, ISO 14001 environmental management and Cyber Essentials certification. A 5-axis scanning CMM is used for inspection, with inspection reports supplied on request. Standalone inspection is also available for parts made elsewhere.
Deadline and availability
Opening hours are Monday to Friday, 7am to 6pm, as previously confirmed for this website. 24/7 machining is available, including overnight and weekend running when needed. Contact APT to discuss your required date and availability; extended running does not mean every deadline can be met.
Our process
How Your Job Runs, Step by Step
- 01
Send your requirements
Provide STEP, IGES or drawings, material, quantity and your required date. Send a physical part if you need reverse engineering.
- 02
Discuss the scope
Discuss machining suitability, design review and any inspection requirements with APT. An NDA is signed with every customer as standard.
- 03
CAM programming
Toolpath programming uses OPEN MIND hyperMILL and Autodesk Fusion.
- 04
5-axis machining
DMG MORI CMX 70 U and Matsuura MX-520 milling machines; 24/7 running is available when needed.
- 05
CMM inspection
5-axis scanning CMM inspection, with inspection reports supplied on request.
FAQs
CNC Machining in Silverstone: Your Questions
Nearby areas we serve
Back to the homepage or contact us.
Do you serve Silverstone?
+
Yes. Silverstone is in Northamptonshire, within our confirmed service area. The workshop is in Chatteris, Cambridgeshire.
Where is the workshop for Silverstone enquiries?
+
Unit 1, South Fens Enterprise Park, Fenton Way, Chatteris PE16 6WA. Contact us before arranging to send a physical part.
What tolerances can you hold?
+
Machining tolerances are 5 to 10 microns (0.005–0.010 mm). Discuss your part and specified features with APT.
What is the maximum machining part size?
+
Maximum machining part size is 675 mm × 600 mm × 550 mm (X × Y × Z), with cylindrical parts up to 600 mm diameter. Typical batches are 1 to 100 parts; one-offs and prototypes are welcome. Contact APT about the suitability of your particular part.
What quantities do you machine?
+
Typical batches are 1 to 100 parts. One-offs and prototypes are welcome, with a strong R&D focus.
Which materials have you machined?
+
Materials machined include aluminium, stainless steel, titanium, plastics and exotic alloys. APT has also machined glass and carbon. Please specify the material and grade in your enquiry so suitability can be discussed.
Which files do you accept?
+
STEP, IGES and technical drawings are accepted. An NDA is signed with every customer as standard. If no drawing exists, send a physical part for scanning, modelling from the scan and production of full drawings.
Can you inspect parts made elsewhere?
+
Yes. Standalone inspection on a 5-axis scanning CMM is available, with reports supplied on request.
Is my design kept confidential?
+
An NDA is signed with every customer as standard.
Is overnight or weekend machining available?
+
Yes. 24/7 machining is available when needed. Contact APT about your deadline and current availability.
Discuss Your Silverstone Machining Project
Send STEP, IGES or technical drawings, or details of a physical part for reverse engineering. Include material, quantity and your required date.
ISO 9001 · ISO 14001 · Cyber Essentials · NDA signed as standard